Publikationen des Instituts für Fertigungstechnik und Werkzeugmaschinen

Breidenstein, B., Denkena, B., Bergmann, B.: (2016): Increased Performance in Hard Turning Operations by Laser Preparation of Mixed Ceramic Tools,  World PM 2016 Congress & Exhibition, 09. - 13.10.2016, Hamburg, 6 S. | Datei |

Konferenz (reviewed)

Denkena, B., Dahlmann, D., Boujnah, H.: (2016): Sensory workpieces for process monitoring – an approach,  3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, SysInt 2016, 13. - 15.06.2016, Paderborn, 7 S. | Datei |

Konferenz (reviewed)

Denkena, B., Dahlmann, D., Kiesner, J.: (2016): Production Monitoring based on Sensing Clamping Elements,  3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, Procedia Technology 26 (2016), S. 235 - 244. | Datei |

Konferenz (reviewed)

Böß, V., Grove, T., Denkena, B., Mücke, A., Nespor, D.: (2016): Prediction of the Principal Stress Direction for 5-axis Ball End Milling,  3rd CIRP Conference on Surface Integrity (CIRP CSI), Procedia CIRP 45 (2016), S. 291 – 294. | Datei |
DOI: 10.1016/j.procir.2016.02.145

Konferenz (reviewed)

Denkena, B., Dittrich, M.-A., Uhlich, F.: (2016): Augmenting milling process data for shape error prediction,  49th CIRP Conference on Manufacturing Systems, Procedia CIRP 57 (2016), S. 487 – 491. | Datei |
DOI: 10.1016/j.procir.2016.11.084

Konferenz (reviewed)

Denkena, B., Dittrich, M.-A., Jacob, S.: (2016): Energy Efficiency in Machining of Aircraft Components,  23rd Conference on Life Cycle Engineering, Procedia CIRP 48 (2016), S. 479 - 482. | Datei |
DOI: 10.1016/j.procir.2016.03.155

Konferenz (reviewed)

Böß, V., Denkena, B., Dittrich, M.-A., Henning, S.: (2016): Geometrical Contact Zone Analysis of the Skive Hobbing Process,  Advanced Materials Research, Vol. 1140 (2016), S. 157 - 164. | Datei |

Zeitschriften/Aufsätze (reviewed)

Behr, M., Schmidt, C.: (2016): Systematic Process Chain Creation for CFRP Structures in Early Product Development Stages,  Advanced Materials Research, Vol. 1140 (2016), S. 328 - 334. | Datei |
DOI: 10.4028/www.scientific.net/AMR.1140.328

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Grove, T., Lucas, H.: (2016): Influences of grinding with Toric CBN grinding tools on surface and subsurface of 1.3344 PM steel,  Journal of Materials Processing Technology, Vol. 229 (2016), S. 541 – 548. | Datei |
DOI: 10.1016/j.jmatprotec.2015.09.039

Zeitschriften/Aufsätze (reviewed)

Ventura, C., Breidenstein, B., Denkena, B.: (2016): Influence of customized cutting edge geometries on the workpiece residual stress in hard turning,  Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, November 2016, 8 S. | Datei |
DOI: 10.1177/0954405416685388

Zeitschriften/Aufsätze (reviewed)

Göttsching, T., Wippermann, A., Grove, T.: (2016): Quick Stop Device to Analyze the Chip Formation Mechanisms in Face Grinding,  Advanced Materials Research, Vol. 1140 (2016), S. 221 - 227. | Datei |
DOI: 10.4028/www.scientific.net/AMR.1140.221

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Schmidt, C., Völtzer, K., Hocke, T.: (2016): Thermographic online monitoring system for Automated Fiber Placement processes,  Composites Part B, Vol. 97 (2016), S. 239 - 243. | Datei |
DOI: 10.1016/j.compositesb.2016.04.076

Zeitschriften/Aufsätze (reviewed)

Ezechieli, M., Meyer, H., Lucas, A., Helmecke, P., Becher, C., Calliess, T., Windhagen, H., Ettinger, M.: (2016): Biomechanical properties of a novel biodegradable magnesium-based interference screw,  Orthopedic Reviews, Vol. 8:6445 (2016), S. 71 - 74. | Datei |

Zeitschriften/Aufsätze (reviewed)

Reiners, J., Denkena, B.: (2016): Investigation on the Dynamic Behaviour of an Ultrasonic-Levitation Magnetic Guiding System,  Advanced Materials Research, Vol. 1140 (2016), S. 377 - 383. | Datei |
DOI: 10.4028/www.scientific.net/AMR.1140.377

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Grove, T., Maiß, O.: (2016): Influence of hard turned roller bearings surface on surface integrity after deep rolling,  3rd CIRP Conference on Surface Integrity (CIRP CSI), Procedia CIRP 45 (2016), S. 359 – 362. | Datei |
DOI: 10.1016/j.procir.2016.02.047

Konferenz (reviewed)

Denkena, B., Dahlmann, D., Krüger, R.: (2016): Control system for an ultra‐precision electromagnetic linear guide,  euspen's 16th International Conference & Exhibition, 30.05. - 03.06.2016, Nottingham, England, 2 S. | Datei |

Konferenz (reviewed)

Denkena, B., Dahlmann, D., Schumacher, T.: (2016): Control model for an over-determined fluid dynamic planar drive,  euspen's 16th International Conference & Exhibition, 30.05. - 03.06.2016, Nottingham, England, 2 S. | Datei |

Konferenz (reviewed)

Grove, T., Denkena, B., Krödel, A., Hess, U.: (2016): Coating wear behavior in dry HPC milling of carbon steel with thin TiAlN, AlTiSiN and AlCrN PVD-coatings,  12th International Conference THE A Coatings 2016, 31.03. - 01.04.2016, Garbsen, S. 241 - 251. | Datei |
ISBN: 978-3-95900-072-7

Konferenz (reviewed)

Denkena, B., Göttsching, T., Brüning, J., Woiwode, S., Krawczyk, T., Ermisch, A.: (2016): Prozess- und Werkzeugauslegung für das Schleifen mittels Materialabtragssimulation,  11. Seminar - Moderne Schleiftechnologie und Feinstbearbeitung - Neue Entwicklungen und Trends aus Forschung und Praxis, 03.05.2016, Stuttgart, S. 9-1 - 9-8. | Datei |

Konferenz

Denkena, B., Schreiber, P.: (2016): Hydraulic Expansion Actuators for Ball Screws – Towards Applicable Preload Adaption,  ACTUATOR 2016 - 15th International Conference on New Actuators, 13. - 15.06.2016, Bremen, S. 552 - 556. | Datei |

Konferenz

Wulf, S., Nyhuis, P., Denkena, B., Blümel, P.: (2007): Integrative Factory, Technology and Product Roadmapping.,  2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production, 23 July 2007, Toronto, 11 Seiten, 2007.

Vortrag

Henning, H.: (2007): Activities of I*PROMS on Advanced Production Machines. ,  IMS Workshop: Strategies for Global Manufacturing - A European View of IMS, 15 November 2007, ETH Zürich, Schweiz, 27 Seiten.

Vortrag

Denkena, B., Radons, G., Blümel, P.: (2006): From Conditiion Monitoring to Wear Prognosis and Predictive Maintenance. ,  XVII Workshop on Supervising and Diagnostics of Machining Systems, 13. March 2006, Karpacz, Poland, 24 Seiten.

Vortrag

Huke, P.: (2006): Einsatz von Laserstrahlung zur Verbesserung der Bauteilqualität von Karosserieblechen. Prozess: Laserstrahlumformen.,  World Laser Summer School 2006, 28. Juni 2006, Hannover, 13 Seiten.

Vortrag

Huke, P.: (2006): Einsatz von Laserstrahlung zur Verbesserung der Bauteilqualität von Karosserieblechen. Prozess: Laserstrahlumformen.,  World Laser Summer School 2006, 28. Juni 2006, Hannover, 13 Seiten.

Vortrag