(2021):
Sensing linear roller guide carriages for condition monitoring applications,
21st Machining Innovations Conference for Aerospace Industry 2021, MIC Procedia (2021), December 1st and 2nd 2021, Hannover, Germany, S. 78-81.
| Datei |
Konferenz (reviewed)
(2021):
Time Series Search and Similarity Identification for Single Item Monitoring,
Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), September 2021, Dresden, S. 479-487
| Datei |
DOI: https://doi.org/10.1007/978-3-030-78424-9_53
DOI: https://doi.org/10.1007/978-3-030-78424-9_53
Konferenz (reviewed)
(2021):
Parametric grinding wheel model for material removal simulation of tool grinding processes,
18th CIRP Conference on Modeling of Machining Operations, Procedia CIRP 102 (2021), June 15-17, 2021, Ljubljana, Slovenia, S. 381-386.
| Datei |
DOI: 10.1016/j.procir.2021.09.065
DOI: 10.1016/j.procir.2021.09.065
Konferenz (reviewed)
(2021):
Investigation of the influence of the forming process and finishing processes on the properties of the surface and subsurface of hybrid components,
The International Journal of Advanced Manufacturing Technology (2021, published online 25. October 2021), 18 Seiten.
| Datei |
DOI: https://doi.org/10.1007/s00170-021-08066-3
DOI: https://doi.org/10.1007/s00170-021-08066-3
Zeitschriften/Aufsätze (reviewed)
(2021):
Charakterisierung thermischer und mechanischer Eigenschaften von bronzegebundenen CBN-Schleifscheiben,
dihw - Diamant Hochleistungswerkzeuge, 13 (2021) 2, S. 12- 17.
| Datei |
Zeitschriften/Aufsätze
(2021):
Einfluss des Pulvers bei der Herstellung sintermetallischer Schleifscheiben – die richtige Wahl entscheidet,
dihw - Diamant Hochleistungswerkzeuge, 13 (2021) 2, S. 16-21.
| Datei |
Zeitschriften/Aufsätze
(2021):
Leistungssteigerung von pCBN-Drehwerkzeugen durch angepasste Schneidkantenmikrogeometrie,
Diamond Business, 2 (2021) 77, S.16-21.
| Datei |
Zeitschriften/Aufsätze
(2021):
Betriebsdaten und ihre aktuellen Potenziale,
ZWF, 116 (2021) 11, S. 852-855.
| Datei |
Zeitschriften/Aufsätze
(2021):
Etablierung eines mechanischen Abrichtverfahrens für das Trennschleifen,
dihw - Diamant Hochleistungswerkzeuge, 13 (2021) 4, S. 8- 12.
| Datei |
Zeitschriften/Aufsätze
(2021):
Kostenkontrolle beim Instandsetzen,
IT&Production (2021) 22, S. 32-33.
| Datei |
Zeitschriften/Aufsätze
(2021):
Data-based ensemble approach for semi-supervised anomaly detection in machine tool condition monitoring,
CIRP Journal of Manufacturing Science and Technology Vol. 35 (2021), S. 795–802.
| Datei |
DOI: https://doi.org/10.1016/j.cirpj.2021.09.003
DOI: https://doi.org/10.1016/j.cirpj.2021.09.003
Zeitschriften/Aufsätze (reviewed)
(2021):
Einsatz von Industrie 4.0-Technologien in der Gastronomie,
Mittelstand-Digital Magazin (2021), Nr. 15, S. 24-29.
| Datei |
Zeitschriften/Aufsätze
(2021):
Cutting inserts made of glass and glass ceramics,
SN Applied Sciences (2021) 3:892, 9 Seiten.
| Datei |
DOI: https://doi.org/10.1007/s42452-021-04887-9
DOI: https://doi.org/10.1007/s42452-021-04887-9
Zeitschriften/Aufsätze (reviewed)
(2021):
Sensorlose Überwachung der Einzelteilfertigung,
WT Werkstattstechnik, 111 (2021), Nr. 5, S. 305-308
| Datei |
DOI: DOI 10.37544/1436–4980–2021–05–39
DOI: DOI 10.37544/1436–4980–2021–05–39
Zeitschriften/Aufsätze (reviewed)
(2020):
Continuous modelling of machine tool failure durations for improved production scheduling,
Production Engineering Research and Development (WGP), Volume 14 (2020) Number 2, April 2020, S. 207-215.
| Datei |
DOI: 10.1007/s11740-020-00955-y
DOI: 10.1007/s11740-020-00955-y
Zeitschriften/Aufsätze (reviewed)
(2020):
Wear mechanism model for grinding of PcBN cutting inserts,
Journal of Materials Processing Technology, Vol. 277 (2020), 11 Seiten.
| Datei |
DOI: 10.1016/j.jmatprotec.2019.116474
DOI: 10.1016/j.jmatprotec.2019.116474
Zeitschriften/Aufsätze (reviewed)
(2020):
Anwendung konventioneller Abrichttechnologien in der Bauindustrie,
Forum Schneidwerkzeug- und Schleiftechnik, 32 (2019) 4, S. 98-100.
| Datei |
Zeitschriften/Aufsätze
(2020):
Schleifen und Walzen kombiniert,
VDW Branchenreport, Januar 2020, S. 8-9.
| Datei |
Zeitschriften/Aufsätze
(2020):
Strukturierte Schleifscheiben für das Profilschleifen,
VDW Branchenreport, Januar 2020, S. 9-11.
| Datei |
Zeitschriften/Aufsätze
(2020):
Prozesskontrolle auch bei tiefen Bohrungen - Entwicklung eines mechatronischen Werkzeugsystems für das BTA-Tiefbohren zur Kompensation des Mittenverlaufs,
wt Werkstattstechnik online BD., 110 (2020), Nr. 01-02, S. 50-53.
| Datei |
Zeitschriften/Aufsätze
Vortrag
Anzahl der gefundenen Publikationen:
684
(2011):
Design of Folded Tubulars for Expandable Casing Applications.,
Celle Drilling 2011, 13.09.2011, Celle, 23 Seiten.
Vortrag
(2011):
Machining induced influence on the subsurface of milled aerospace parts.,
New manufacturing technologies in aerospace industry : proceedings / Machining Innovations Conference, September 23rd 2011 in Hannover at the EMO, S. 274-283.
Vortrag
(2011):
Grinding of Steel-Ceramic-Composites.,
Fachmesse EMO Hannover 2011, September 21th, Hannover, 16 Seiten.
Vortrag
(2011):
Grinding of Microstructures.,
Fachmesse EMO Hannover 2011, September 20th, Hannover, 16 Seiten.
Vortrag
(2011):
Data storage by means of micro patterned surfaces.,
Fachmesse EMO Hannover 2011, 23. September, Hannover, 11 Seiten.
Vortrag
(2011):
Wire Cutting Tool Concepts for Steel Machining.,
14th International Symposium of Advances in Abrasive Technology (ISAAT 2011), September 20th, Stuttgart, 14 Seiten.
Vortrag
(2011):
Innovative Cutting Edge Geometry for Hard Turning.,
Fachmesse EMO Hannover 2011, September 22nd, 17 Seiten.
Vortrag
(2011):
Planar feed drive for machine tools.,
PZH Forum EMO, September 22nd, 2011, 10 Seiten.
Vortrag
(2011):
Grinding of Steel-Ceramic-Composites.,
14th International Symposium of Advances in Abrasive Technology (ISAAT 2011), September 20th, 2011, Stuttgart, 15 Seiten.
Vortrag
(2011):
Efficient and value oriented Machine Tools.,
Fachmesse EMO Hannover 2011, September 23rd, Hannover, 9 Seiten.
Vortrag
(2011):
Process Force Prediction in Orbital Drilling of Ti-64.,
9th International Conference on Advanced Manufacturing Systems and Technology (AMST'11), June 16th, 2011, Mali Losinj, 14 Seiten.
Vortrag
(2011):
Integrative Planung und Auslegung fertigungstechnischer Prozessketten.,
Fachgespräch zwischen Industrie und Wissenschaft (Industrieworkshop), 18. August 2011, Fridingen, 21 Seiten.
Vortrag
(2011):
Grinding and Polishing of Ceramic Knee Implants. ,
61th CIRP General Assembly, August 26th, 2011, Budapest, Hungary, 24 Seiten.
Vortrag
(2011):
Velocity Effects in Metal Forming and Machining Processes.,
61th CIRP General Assembly, August 22, 2011, Budapest, Hungary, 33 Seiten.
Vortrag
(2011):
Integrated active damping of main spindles.,
61th CIRP General Assembly, August 26th, 2011, Budapest, Hungary, 16 Seiten.
Vortrag
(2011):
Active error compensation in contour-controlled grinding.,
61th CIRP General Assembly, August 21-27, 2011, Budapest, Hungary, 32 Seiten.
Vortrag
(2011):
Effects of the cutting edge microgeometry on tool wear and its thermo-mechanical load.
,
61th CIRP General Assembly, August 23th, 2011, Budapest, Hungary, 30 Seiten.
Vortrag
(2011):
Life-cycle based technology planning and assessment of machine tools within the aviation industry.,
44th CIRP Conference on Manufacturing Systems, June 1st, 2011, Madison, 22 Seiten.
Vortrag
(2011):
Turning and Grinding of Iron-Aluminium Alloys.,
FeAl2011: Discussion Meeting on the Development of Innovative Iron-Aluminuim Alloys, October 5th, 2011, Lanzarote, 30 Seiten.
Vortrag