Publikationen – Institut für Fertigungstechnik und Werkzeugmaschinen

Hier finden Sie die Dissertationen des IFW

Zu den Dissertationen

Hier finden Sie die Patente des IFW

Zu den Patenten

… 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 …

Anzahl der gefundenen Publikationen: 4755

Denkena, B., Ahlborn, P.: (2022): Linear-rotary direct drive for multi-functional machine tools, Cirp Annals - Manufacturing Technology, Vol. 71 (2022) Nr. 1, published online 12. April 2022, S. 349-352. | Datei |
DOI: https://doi.org/10.1016/j.cirp.2022.03.015

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Bergmann, B., Kraeft, M.: (2022): Produktivitätssteigerung durch belastungsoptimierte Schneidkantenmikrogeometrien, VDI-Z, BD. 164 (2022), Nr. 6, 24-26. | Datei |

Zeitschriften/Aufsätze

Kettelmann, S.: (2022): Ökologisch nachhaltig mit unternehmensübergreifenden Prozessketten, IndustryArena competence network for production (2022), online erschienen am 16. August 2022, 2 Seiten. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Bergmann, B., Hurschler, C., Welke, B., Einfeldt, A.-C., Legutko, B.: (2022): Die Patientensicherheit bei Hüftendoprothesen erhöhen, DeviceMed ( 2022), Nr. 6, S. 76-77. | Datei |

Zeitschriften/Aufsätze

Budde, L., Merkel, P., Prasanthan, V., Bährisch, S., Faqiri, M. Y., Lammers, M., Stonis, M., Hermsdorf, J., Hassel, T., Uhe, J., Behrens, B.-A., Breidenstein, B., Overmeyer, L.: (2022): Combination of cladding process with subsequent hot forming as a new approach for the production of hybrid components, Solid Freeform Fabrication 2022: Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (2022), 25.-27. July 2022, Austin, USA, S. 1223-1233. | Datei |

Konferenz (reviewed)

Denkena, B., Klemme, H., Handrup, M., Schmidt, C.: (2022): Mikrostrukturen erhöhen die Effizienz von Flügelzellenpumpen, MM MaschinenMarkt (2022), online erschienen 17. August 2022, 5 Seiten. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Wichmann, M., Heide, K. M., Räker, R.: (2022): Laser Scanning Based Object Detection to Realize Digital Blank Shadows for Autonomous Process Planning in Machining, Journal of Manufacturing and Materials Processing (2022), 6, 1, 16 Seiten. | Datei |
DOI: https://doi.org/10.3390/jmmp6010001

Zeitschriften/Aufsätze (reviewed)

Pape, F., Liu, H., Ellersiek, L., Krödel, A., Denkena, B., Poll, G.: (2022): Influence of Metal Working Fluids in Cutting Processes, Defect and Diffusion Forum, Vol. 414 (2022), S. 51-57. | Datei |
DOI: https://doi.org/10.4028/p-dnly6l
ISSN: 1662-9507 Beschreibung: <p>For the realization of efficient production processes, an understanding of the appropriate application of metal working fluids (MWF) is necessary. In addition to knowledge about the process-related aspect of chip transport and the macroscopic cooling effect, the characteristics and properties of the lubrication film thickness and the cooling conditions in the area of the secondary shear zone on the chip surface, i.e. in the direct vicinity of the material separation, represent a fundamental scientific issue within production technology. In particular, these areas generate a high proportion of heat during machining, so that the local friction phenomena have a significant influence on the resulting edge zone of the produced component and the thermomechanical load on the tool. Currently, there are no numerical models and methods for mapping and predicting the lubrication film thickness that can be used in the sense of a targeted design of the cooling lubricant supply. The aim is to transfer the methods from the field of tribology of machine elements, which have already led to significant knowledge gains in this discipline, to machining and couple them to approaches already established in machining. To this end, experiments on tribometers have been performed as a first step. For example, an oscillating pin-on-plate tribometer was used. In this setup, a steel plate is doing oscillating motion against a fixed ball (diameter of 6 mm) under a defined load. The frictional force is recorded during the test. A MWF in a heated tank is used for the lubricant. Additional investigations on the film thickness were performed on an optical EHL (elasto-hydrodynamic lubrication) tribometer. In this setup, a ball rolls on a glass-disc and the resulting film thickness is measured by interferometry. For comparison, the influence of the MWF on the chip formation process in metal cutting was investigated on a special test rig (machine tool). This test rig allows high speed imaging and force measurements of an orthogonal cutting process while using MWFs. The first results show a reduced contact length between chip and tool as well as lower process forces for processes with MWFs compared to dry cutting processes. In future investigations, this test rig will be applied for the identification of the local friction coefficient between chip and tool. The data gained from the cutting test are compared with the output of the tribological test rigs.  </p>

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Krödel-Worbes, A., Müller-Cramm, D.: (2022): Wear‑adaptive optimization of in‑process conditioning parameters during face plunge grinding of PcBN, Scientifc Reports (2022), 11 Seiten. | Datei |
DOI: https://doi.org/10.1038/s41598-022-05066-5

Zeitschriften/Aufsätze (reviewed)

Heikebrügge, S., Ottermann, R., Breidenstein, B., Wurz, M. C., Dencker, F.: (2022): Residual Stresses from Incremental Hole Drilling Using Directly Deposited Thin Film Strain Gauges, Experimental Mechanics (2022), published online 14. January 2022, 13 Seiten. | Datei |
DOI: https://doi.org/10.1007/s11340-022-00822-0 Beschreibung: <p>Background Commonly, polymer foil-based strain gauges are used for the incremental hole drilling method to obtain residual stress depth profles. These polymer foil-based strain gauges are prone to errors due to application by glue. For example zero depth setting is thus often erroneous due to necessary removal of polymer foil and glue. This is resulting in wrong use of the calibration coefcients and depth resolution and thus leading to wrong calculations of the obtained residual stress depth profles. Additionally common polymer foil-based sensors are limited in their application regarding e.g. exposure to high temperatures. Objective This paper aims at a frst step into the qualifcation of directly deposited thin flm strain gauges for use with the incremental hole drilling method. With the directly deposited sensors, uncertainties regarding the determination of calibration coefcients and zero depth setting due to the absence of glue can be reduced to a minimum. Additionally, new areas of interest such as the investigation of thermally sprayed metallic layers can be addressed by the sensors due to their higher temperature resilience and their component inherent minimal thickness. Methods For the frst time, diferent layouts of directly deposited thin flm strain gauges for residual stress measurements were manufactured on a stainless steel specimen. Strain measurements during incremental hole drilling using a bespoke hole drilling device were conducted. Residual stress depth profles were calculated using the Integral method of the ASTM E837 standard. Afterwards, strain measurements with conventional polymer foil-based strain gauges during incremental hole drilling were conducted and residual stress depth profles were calculated accordingly. Finally the obtained profles were compared regarding characteristic values. Results The residual stress depth profles obtained from directly deposited strain gauges generally match the ones obtained from conventional polymer foil based strain gauges. With the novel strain gauges, zero depth setting is simplifed due to the absence of glue and polymer foil. With the direct deposition, a wide variety of rosette designs is possible, enabling a more detailed evaluation of the strain feld around the drilled hole. Conclusions The comparative analysis of the obtained residual stress depth profles shows the general feasibility of directly deposited strain gauges for residual stress measurements. Detailed investigations on uncertainty sources are still necessary.  </p>

Zeitschriften/Aufsätze (reviewed)

Gerken, J. F., Klages, N., Biermann, D., Denkena, B.: (2022): Development and analysis of a mechatronic system for in-process monitoring and compensation of straightness deviation in BTA deep hole drilling, Mechanical Systems and Signal Processing 170 (2022), 19 Seiten. | Datei |
DOI: https://doi.org/10.1016/j.ymssp.2022.108838

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Bergmann, B., Relard, A.: (2022): Produktivitätssteigerung durch Werkzeugverschleiß, Zerspanungstechnik.de (2022), erschienen online am 18. Januar 2022, 2 Seiten. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Dittrich, M.-A., Settnik, S. J.: (2022): Similarity-based Process and Set-up Time Estimation, Proceedings of the 8th CARV 2021 and the 10th World MCPC 2021, Aalborg, Denmark, Oct/Nov 2021, S. 603-611. | Datei |
DOI: https://doi.org/10.1007/978-3-030-90700-6_68

Konferenz (reviewed)

Denkena, B., Bergmann, B., Berlin, J., Handrup, M., Maiss, O.: (2022): Sensorisches Festwalzwerkzeug für die Prozessüberwachung, mav (2022), Nr. 1, S. 66-68. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Bergmann, B., Raffalt, D.: (2022): Operational behaviour of graded diamond grinding wheels for end mill cutter machining, SN Applied Sciences (2022), 10 Seiten. | Datei |
DOI: https://doi.org/10.1007/s42452-022-04970-9

Zeitschriften/Aufsätze (reviewed)

Liu, H. C., Pape, F., Zhao, Y., Ellersiek, L., Denkena, B., Poll, G.: (2022): On the Elastohydrodynamic Film‑Forming Properties of Metalworking Fluids and Oil‑in‑Water Emulsions, Tribology Letters, Vol. 71 (2023), Nr. 10, published online 07. December 2022, 13 Seiten. | Datei |
DOI: https://doi.org/10.1007/s11249-022-01684-2

Zeitschriften/Aufsätze (reviewed)

Breidenstein, B., Bergmann, B., Beblein, S., Grzeschik, F.: (2022): FEM-based simulation of continuous wear of CrAlN-coated tools, 10th CIRP Global Web Conference – Material Aspects of Manufacturing Processes, Procedia CIRP, Vol. 115 (2022), online 25.-27. October 2022, S. 95-100. | Datei |
DOI: https://doi.org/10.1016/j.procir.2022.10.056

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Bergmann, B., Hein, M.: (2022): Verschleißverhalten nachgiebiger Diamantpolierwerkzeuge, Diamond Business, Vol. 4 (2022), Nr. 83, S. 42-47. | Datei |
ISSN: 1619-5558

Zeitschriften/Aufsätze

Denkena, B., Breidenstein, B., Wichmann, M., Nguyen, H. N., Fricke, L. V., Barton, S., Maier, H. J.: (2022): Funktionsorientierte Stellgrößenauslegung beim Drehen, WT Werkstattstechnik Bd. 112 (2022), Nr. 11-12, S. 767-772. | Datei |
DOI: doi.org/10.37544/1436-4980-2022-11-12-41

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Bergmann, B., Murrenhoff, M.: (2022): Effiziente und ressourcenschonende Fertigung von Luftfahrtgetrieben, Unter Span (2022), S. 32-33. | Datei |
ISSN: 2365-7006

Zeitschriften/Aufsätze

Vortrag

… 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 …

Anzahl der gefundenen Publikationen: 684

Denkena, B., Dahlmann, D., Klemme, H.: (2016): Investigations on Thermal Management of a Machine Tool Spindle by Using Lamellar Heat Exchangers, Euspen special interest group: Thermal Issues 2016, 17. - 18.03.2016, Prag, Tschechien, 26 Seiten.

Vortrag

Denkena, B., Dahlmann, D., Walger, S.: (2016): Online Compensation of Thermal Errors in Machine Tools using Temperature Field Observer, Euspen special interest group: Thermal Issues 2016, 17. - 18.03.2016, Prag, Tschechien, 21 Seiten.

Vortrag

Pape, F., Poll, G., Denkena, B., Maiß, O.: (2016): Tribological Investigations of Angular Contact Ball Bearings Operated under Small Pivoting Angles for Production Process Analysis, 7th International Conference on Tribology in Manufacturing Processes, 28.02. - 02.03.2016, Phuket, Thailand, 23 Seiten.

Vortrag

Denkena, B., Göttsching, T., Christiani, S.: (2016): Werkzeug- und Prozessoptimierung für die Schleifbearbeitung aluminiumhaltiger Leichtbaustähle, Hanser Schleiftagung 2016, 24.02.2016, Fellbach, 30 Seiten.

Vortrag

Denkena, B., Grove, T., Behrens, L.: (2016): Schleifen von PCBN, Hanser Schleiftagung 2016, 24.02.2016, Fellbach, 5 Seiten.

Vortrag

Denkena, B., Grove, T., Gottwik, L., Hering, B., Kuntz, M., Wippermann, A.: (2016): Novel approach for manufacturing technological based characterization of residual strength behavior of ceramic for dental applications, TMS 2016, 145th Annual Meeting & Exhibition, 14. - 18.02.2016, Nashville, USA, 15 Seiten.

Vortrag

Hering, B., Wippermann, A., Mörke, T., Grove, T., Denkena, B.: (2016): Manufacturing of osteosynthesis systems made of magnesium alloy AZ91, TMS 2016, 145th Annual Meeting & Exhibition, 14. - 18.02.2016, Nashville, USA, 14 Seiten.

Vortrag

Denkena, B., Behrens, L., Bremer, I., Bouabid, A.: (2016): Influence of the sintering parameters on the properties of metal bonded grinding wheels, CIRP Winter Meeting, 17. - 19.02.2016, Paris, Frankreich, 16 Seiten.

Vortrag

Denkena, B., Dahlmann, D., Boujnah, H., Mücke, M.: (2016): Sensory Workpieces for Process Monitoring –an Approach, 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, SysInt 2016, 13. - 15.06.2016, Paderborn, 19 Seiten.

Vortrag

Denkena, B., Dahlmann, D., Neff, T.: (2016): Autonomous Modular Process Monitoring, 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, SysInt 2016, 13. - 15.06.2016, Paderborn, 25 Seiten.

Vortrag

Denkena, B., Dittrich, M.-A., Uhlich, F.: (2016): Self-optimizing cutting process using learning process models , 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, SysInt 2016, 13. - 15.06.2016, Paderborn, 16 Seiten.

Vortrag

Denkena, B., Grove, T., Suntharakumaran, V.: (2016): Application of metal bonded CBN-wheels with micro grains , 5th European Conference on Grinding, 29. - 30.11.2016, Aachen, 4 Seiten.

Vortrag

Denkena, B., Dahlmann, D., Schumacher, T.: (2016): Control model for an over-determined fluid dynamic planar drive, euspen's 16th International Conference & Exhibition, 30.05. - 03.06.2016, Nottingham, England, 25 Seiten.

Vortrag

Denkena, B., Reiners, J., Wallaschek, B., Twiefel, J., Ille, I.: (2016): Application of Combined Ultrasonic Levitation - Magnetic Actuators for Machine Guideways, ACTUATOR 2016 - 15th International Conference on New Actuators, 13. - 15.06.2016, Bremen, 16 Seiten.

Vortrag

Denkena, B., Nespor, D.: (2015): Prediction of surface topography after ball end milling – a matter of tool modelling , CIRP STC-C-Meeting, 19.02.2015, Paris, 15 Seiten.

Vortrag

Denkena, B., Grove, T., Bouabid, A.: (2015): Schleifscheibenherstellung am IFW , 12. Hanser Schleiftagung, 10. - 11.02.2015, Stuttgart-Fellbach, 6 Seiten.

Vortrag

Köster, P. F., Merwart, M.: (2015): Flexible Lerninsel - Ein e-didaktisches Konzept zur Flexibilisierung von Lernarrangements, Jahrestagung der Deutschen Gesellschaft für wissenschaftliche Weiterbildung und Fernstudien, 23. - 25.09.2015, Freiburg, 11 Seiten.

Vortrag

Dreier, S., Brüning, J., Denkena, B.: (2015): Simulation based Reduction of Residual Stress Related Part Distortion, 5th International Conference on Distortion Engineering (IDE), 23. - 25.09.2015, Bremen, 14 Seiten.

Vortrag

Denkena, B., Poll, G., Pape, F., Maiß, O.: (2015): Hybride Oberflächenbehandlung zur Lebensdauersteigerung von Wälzlagern, DGM Werkstoffwoche, 14. - 17.09.2015, Dresden, 21 Seiten.

Vortrag

Hering, B., Grove, T., Denkena, B., Wippermann, A.: (2015): Heat generation during cutting of bone, 49th Annual Conference of the German Society for Biomedical Engineering (DGBMT), 16. - 18.09.2015, Lübeck, 18 Seiten.

Vortrag

Publikationen des Instituts für Fertigungstechnik und Werkzeugmaschinen

Vortrag