Publikationen – Institut für Fertigungstechnik und Werkzeugmaschinen

Hier finden Sie die Dissertationen des IFW

Zu den Dissertationen

Hier finden Sie die Patente des IFW

Zu den Patenten

… 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 …

Anzahl der gefundenen Publikationen: 4755

Dänekas, C., Heikebrügge, S., Schubnell, J., Schaumann, P., Breidenstein, B., Bergmann, B.: (2022): Influence of deep rolling on surface layer condition and fatigue life of steel welded joints, International Journal of Fatigue 162 (2022), 13 Seiten.
DOI: https://doi.org/10.1016/j.ijfatigue.2022.106994

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Schmidt, C., Schmitt, C., Kaczemirzk, M.: (2022): Experimental Investigation on the Use of a PEI Foam as Core Material for the In-Situ Production of Thermoplastic Sandwich Structures Using Laser-Based Thermoplastic Automated Fiber Placement, Materials, Vol 15 (2022), Nr. 7141, 15 Seiten. | Datei |
DOI: https://doi.org/10.3390/ma15207141

Zeitschriften/Aufsätze (reviewed)

Herwig, A., Schmidt, C., Horst, P.: (2022): Investigation of the Strainfield surrounding complex-shaped local fiber metal hybrids, Composites Meet Sustainability – Proceedings of the 20th European Conference on Composite Materials, ECCM20. 26.-30. June 2022, Lausanne, Switzerland, 8 Seiten. | Datei |
DOI: https://doi.org/10.1016/j.procir.2021.03.063

Konferenz (reviewed)

Fix, J., Schmidt, C., Meiners, D.: (2022): Effect of Tape Feed Parameters on Temperature in Prepreg Tape During Thermoplastic Automated Fiber Placement, 6th International Conference & Exhibition on Thermoplastic Composites (2022) ITHEC 2022, 12.-13. October 2022, Bremen, Germany, S. 177-180. | Datei |

Konferenz

Friedel, A., Heimbs, S., Horst, P., Schmidt, C., Timmermann, M., Hakiri, F., Herwig, A.: (2022): Impact Automated Fibre Placement Induced Defects on the Compression Behaviourof CFRP Structures, SAMPE Europe Conference (2022), 15.-17. November 2022, Hamburg, Germany, 9 Seiten. | Datei |

Konferenz

Wolters, P., Breidenstein, B., Denkena, B., Bergmann, B.: (2022): Design of tool grinding processes for indexable inserts made of rocks, The International Journal of Advanced Manufacturing Technology (2022) Nr. 124, published online 25. November 2022, S.887–905. | Datei |
DOI: https://doi.org/10.1007/s00170-022-10557-w

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Handrup, M., Schmidt, C., Pillkahn, P., Katzsch, D., Reuter, L., Stelljes, F.: (2022): Energieeffiziente Prozessketten zur Herstellung eines reibungs-, gewichts- und lebensdaueroptimierten Antriebsstrangs, "Antriebsstrang 2025" - "Energieeffiziente Prozessketten zur Herstellung eines reibungs-, gewichts- und lebensdaueroptimierten Antriebstrangs" : gemeinsamer Abschlussbericht zum BMWK-Verbundprojekt (2022), Laufzeit: 01.09.2018-28.02.2022, Leibniz Universität Hannover, 136 Seiten.
DOI: https://doi.org/10.2314/KXP:1839641614

Bücher

Fricke, L. V., Nguyen, H. N., Appel, J., Breidenstein, B., Maier, H. J., Zaremba, D., Barton, S.: (2022): Characterization of deformation-induced martensite by cryogenic turning using eddy current testing, 6th CIRP Conference on Surface Integrity, Procedia CIRP 108 (2022), S. 49–54. | Datei |
DOI: 10.1016/j.procir.2022.03.014

Zeitschriften/Aufsätze (reviewed)

Dzierzawa, P., Bergmann, B., Denkena, B.: (2022): Digitales Schleifwerkzeug: von der Herstellung bis zum Einsatz, VDI-Z, BD. 164 (2022), Nr. 5, S. 53-55. | Datei |

Zeitschriften/Aufsätze

Schönemann, L., Dörgeloh, T., Riemer, O., Schreiber, P., Klemme, H., Denkena, B.: (2022): Ultra-precision high performance cutting of nickel silver using a magnetically levitated feed axis, euspen’s 22nd International Conference & Exhibition (2022) 30th May – 3rd June 2022, Geneva, CH, 4 Seiten. | Datei |

Konferenz (reviewed)

Denkena, B., Klemme, H., Handrup, M.: (2022): Maschinelles Lernen erhöht Prozesssicherheit in der Zerspanung von Tailored Forming Bauteilen, Zukunft.Digital (2022) Nr. 01, S. 28-31. | Datei |

Zeitschriften/Aufsätze

Seume, J., Denkena, B., Bergmann, B., Buhl, H.: (2022): Nachhaltigkeit und Produktivitätssteigerung ohne Widerspruch, Zukunft Digital (2022), Nr. 01, S. 16-18. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Wichmann, M., Wulf, M.: (2022): Revolutionäres Werkzeugschleifen, dank digitalem Zwilling, Diamond Business, Vol. 82 (2022) Nr. 3, S. 26-29. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Bergmann, B., Raffalt, D.: (2022): Dressing of hybrid‑bonded graded diamond grinding wheels, Production Engineering (2022), published online 17. September 2022, 7 Seiten. | Datei |
DOI: https://doi.org/10.1007/s11740-022-01163-6
ISSN: 0944-6524

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Bergmann, B., Schumacher, T.: (2021): Anticipatory Online Compensation of Tool Deflection Using a Priori Information from Process Planning, Journal of Manufacturing and Materials Processing, 5 (2021) 90, 16 Seiten. | Datei |
DOI: https://doi.org/10.3390/jmmp5030090

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Bergmann, B., Rahner, B.-H.: (2021): A novel tool monitoring approach for diamond wire sawing, Production Engineering (2021, published online 10. November 2021), 8 Seiten. | Datei |
DOI: https://doi.org/10.1007/s11740-021-01087-7

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Krödel, A., Lang, R.: (2021): Fabrication and use of Cu-Cr-diamond composites for the application in deep feed grinding of tungsten carbide, Diamond & Related Materials, Vol. 120 (2021), S. 1-6. | Datei |
DOI: https://doi.org/10.1016/j.diamond.2021.108668

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Bergmann, B., Stiehl, T. H.: (2021): Transfer of Process References between Machine Tools for Online Tool Condition Monitoring, Machines, 9 (2021) 282, 13 Seiten. | Datei |
DOI: https://doi.org/10.3390/machines9110282

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Breidenstein, B., Krödel, A., Bergmann, B., Picker, T., Wolters, P.: (2021): Suitability of natural rocks as materials for cutting tools, SN Applied Sciences (2022) 4:2, 21 Seiten. | Datei |
DOI: https://doi.org/10.1007/s42452-021-04883-z Beschreibung: Modern manufacturing processes place high demands on cutting tool materials. Therefore, a constant improvement and redevelopment of these materials is needed to meet their demands. A disadvantage of modern high-performance cutting tool materials such as cemented carbides or polycrystalline diamond (PCD) is that they require rare materials and large amounts of energy for their production [1]. In addition, the partially critical availability of raw materials such as tungsten or cobalt poses a further challenge. Due to this and the high price of such materials, there is a high need to recycle and substitute them. This is especially true for regions where cutting tools are produced but where the raw materials are not mined like the USA [2] or the European Union [3, 4]. Therefore, research projects aim to fnd ways to substitute these critical raw materials [5] or to identify suitable alternative cutting tool materials [6]. In order to meet these challenges a cutting tool material with a high (global) availability, a low energy consumption in the production process and low raw material prices is required. Natural rocks could pose such an alternative. Rocks have a high global availability due to a large number of comparatively easily accessible deposits all over the world. In addition, the use of rocks means that complex und energy-intensive preparation and production processes for the cutting material can be dispensed with, as the cutting material rock is already available in nature in the required state. Compared to the production of a kilogram of conventional cemented carbide, for example, this would save between 290 and 480 MJ-equivalents of energy. In addition, this would also mean a reduction in emissions of climate afecting gases in the order of 10 to 19 kg CO2-equivalents [1]. Overall, the use of rock as a cutting material could therefore provide the tool industry with a cost-efective alternative with high availability and a low energy demand in production compared to conventional cutting materials. At the same time, this would support the industry’s shift towards greater sustainability, which is necessary with regard to climate change. So far, however, no systematic investigation of the usability and suitability of natural rocks as cutting tool materials has been carried out.

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Krödel-Worbes, A., Keitel, M., Wolters, P.: (2021): Influence of dressing strategy on tool wear and performance behavior in grinding of forming tools with toric grinding pins, Production Engineering (2021, published online 02. December 2021), 10 Seiten | Datei |
DOI: https://doi.org/10.1007/s11740-021-01089-5

Zeitschriften/Aufsätze (reviewed)

Vortrag

… 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 …

Anzahl der gefundenen Publikationen: 684

Krieglsteiner J., Horst, P., Schmidt, C.: (2014): CHARACTERIZATION OF FIBER-REINFORCED STIFFENER PROFILES FOR AIRCRAFT FUSELAGE PRELIMINARY STRUCTURAL DESIGN, ECCM16 - 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain, 22. - 26. Juni 2014, 11 Seiten.

Vortrag

Peters, R., Litwinski, K., Overmeyer, L., Denkena, B.: (2014): Model-based Feedback Control via Control Integrated Observers, 15th International Conference on Precision Engineering in Kanazawa, Japan, 24. Juli 2014, 19 Seiten.

Vortrag

Peters, R., Litwinski, K., Eckl, M., Lepper, T., Denkena, B.: (2014): Hybrid Positioning for Large Laser Cutting Operations of Carbon Fiber Reinforced Plastics, 15th International Conference on Precision Engineering, Kanazawa, Japan, 24 Juli 2014, 17 Seiten.

Vortrag

Denkena, B., Nespor, D.: (2014): Eigenspannungen nach der spanenden Rekonturierung von Titanbauteilen mittels Kugelkopffräser, AWT Fachausschuss Eigenspannungen, 28./29. Oktober 2014, Kassel, 28 Seiten.

Vortrag

Denkena, B., Breidenstein, B., Mörke, T.: (2014): Nutzung des Eigenspannungsabbaus zur Bestimmung der Belastungshistorie spanend gefertigter Bauteile, Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik, Fachausschuss 13 Eigenspannungen, 28.10.2014, 16 Seiten.

Vortrag

Wippermann, A., Gottwik, L., Kuntz, M., Grove, T., Denkena, B.: (2014): Grinding of New Zirconia-based Materials for Medical Applications with Electroplated Diamond Tools, 48th Annual Conference of the German Society for Biomedical Engineering (DGBMT), 08.-10. Oktober 2014, Hannover, 13 Seiten.

Vortrag

Müller, A., Heller, Ch., Köhler, J., Krämer, M., Welke, B., Hurschler, Ch., Almohallami, A., Bouguecha, A., Behrens, B.-A., Denkena, B.: (2014): Verschleißsimulation und Prüfung von vereinfachten keramischen Knieimplantatkomponenten, SFB 599, Medizinische Hochschule Hannover, 2014, 11 Seiten.

Vortrag

Hering, B., Helmecke, P., Denkena, B.: (2014): Machining of Magnesium Implants, BMT, October 9th 2014, Hannover, 20 Seiten.

Vortrag

Denkena, B., Grove, T., Rehe, M., Bergmann, B.: (2014): MATERIAL SPECIFIC CUTTING EDGE GEOMETRIES FOR MACHINING PROCESSES, 11th International Conference on High Speed Machining, September 11 - 12, 2014, Prague, 22 Seiten.

Vortrag

Denkena, B., Dahlmann, D., Damm, J.: (2014): Self-adjusting Process Monitoring System in Series Production , CIRP ICME 2014, 23 - 25 July 2014, Capri, Naples, Italy, 24 Seiten.

Vortrag

Denkena, B., Hülsemeyer, L.: (2014): Energy Efficient Machine Tools and Technologies, ICMTE 2014, 1. Oktober 2014, Jeju, Korea, 30 Seiten.

Vortrag

Winter, F.: (2014): Competence-based personnel deployment planning - Research results and transfer into practice , Fauser Partnermeeting 2014, 24.-25. September 2014, München, 24 Seiten.

Vortrag

Georgiadis, A.: (2014): Simulationsbasierte Reihenfolgeregel für MRO Prozesse am Beispiel von Zugkupplungen, 4. WGP Jahreskongress, 9. und 10. September 2014, Erlangen, 20 Seiten.

Vortrag

Denkena, B., Dahlmann, D., Kiesner, J.: (2014): Sensor Integration for a Hydraulic Clamping System, 2nd International Conference on System-integrated Intelligence, 3rd of July 2014, Bremen, 11 Seiten.

Vortrag

Denkena, B., Grove, T., Dittrich, M. A., Lahres, M.: (2014): Microstructure analysis of an aluminum-alloyed UHC-steel and implications for the machinability, CIRP Genral Assembly STC-C, 29.08.2014, Nantes, 17 Seiten.

Vortrag

Denkena, B., Nemeti, A., Winter, F.: (2014): Stock-Market Related Price Determination in Consideration of Time Dynamic Cost Factors, 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering, July 23-25 2014, Capri, 9 Seiten.

Vortrag

Denkena, B., Winter, F.: (2014): Simulation-based planning of production capacity through integrative roadmapping in the wind turbine industry, 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering, July 23-25 2014, Capri, 16 Seiten.

Vortrag

Denkena, B., Litwinski, K., Boujnah, H.: (2014): Process Monitoring with a Force Sensitive Axis-Slide for Machine Tools, 2nd International Conference on System-Integrated Intelligence: Challenges for Product and Production Engineering, 02.07.2014, Bremen, 10 Seiten.

Vortrag

Denkena, B., Litwinski, K., Boujnah, H.: (2014): Vererbung in der Arbeitsgruppe Demonstratoren und Datenstrukturen, Workshop: Vererbung in der Technik, Workshop der AG Vererbung, 20.03.2014, Garbsen, 16 Seiten.

Vortrag

Denkena, B., Fischer, R., Euhus, D., Neff, T.: (2014): Simulation based Process Monitoring for Single Item Production without Machine External Sensors, 2nd International Conference on System-Integrated Intelligence: Challenges for Product and Production Engineering, SysInt 2014, July 2nd, 2014, Bremen, 15 Seiten.

Vortrag

Publikationen des Instituts für Fertigungstechnik und Werkzeugmaschinen

Vortrag