Publikationen – Institut für Fertigungstechnik und Werkzeugmaschinen

Hier finden Sie die Dissertationen des IFW

Zu den Dissertationen

Hier finden Sie die Patente des IFW

Zu den Patenten

… 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 …

Anzahl der gefundenen Publikationen: 4755

Biermann, D., Würz, E., Denkena, B., Hajibeik, N., Hasselberg, E.: (2010): Verschleißverhalten keramischer Wendeschneidplatten., MM - Maschinenmarkt, 31/32 (2010), S. 26-29. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Eikötter, M., Blümel, P.: (2010): Technology assessment within product, technology and factory planning under consideration of lifecycles., The IFIP WG5.1 7th International Conference on Product Lifecycle Management, BIBA University of Bremen, 12th - 14th July 2010, 6 Seiten.

Konferenz (reviewed)

Denkena, B., Kästner, J., Wang, B.: (2010): Advanced microstructures and its production through cutting and grinding., CIRP Annals - Manufacturing Technology, 59 (2010) 1, S. 67-72. | Datei |

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Ammermann, C.: (2010): Modular Numerical Control Model Including Realistic Motion Planning., The IFIP WG5.1 7th International Conference on Product Lifecycle Management, BIBA University of Bremen, 12th - 14th July 2010, 10 Seiten. | Datei |

Konferenz (reviewed)

Denkena, B., Blümel, P., Kröning, S.: (2010): Simulationsbasierte Instandhaltung. Optimierung der Instandhaltungsplanung und -steuerung mit Hilfe ereignisorientierter Simulation. , wt Werkstattstechnik online, 100 (2010) H. 7/8, S. 598-603. | Datei |

Zeitschriften/Aufsätze (reviewed)

Denkena, B., de Leon, L., Seiffert, F.: (2010): Process Influences in the Wire Cutting of Concrete., Advanced Materials Research, Vols. 126-128 (2010), S. 70-76. | Datei |

Zeitschriften/Aufsätze (reviewed)

Richter, B.I., Ostermeier, S., Turger, A., Denkena, B., Hurschler, C.: (2010): A rolling-gliding wear simulator for the investigation of tribological material pairings for application in total knee arthroplasty., BioMedical Engineering OnLine 2010, www.biomedical-engineering-online.com/content/9/1/24, 22 Seiten. | Datei |

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Heinisch, D., Krüger, M., Stephan, E.P., Maischak, M., Andres, M.: (2010): Investigations on Dynamic Tool, Structure and Process Interaction., Proceedings of the 2nd International Conference Process Machine Interactions (PMI), Proc. auf CD-ROM, June 10-11, 2010, Vancouver, 10 Seiten. | Datei |

Konferenz (reviewed)

Denkena, B., Köller, M., Röders, G.: (2010): Virtual Prototyping in Werkzeug- und Formenbau. Optimierungspotenziale identifizieren und Zielkonflikte visualisieren., wt Werkstattstechnik online, 100 (2010) H. 7/8, S. 612-616. | Datei |

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Eikötter, M., Schürmeyer, J., Goesmann, R., Apmann, H., Lünemann, M.: (2010): Technologieplanung und -bewertung mittels Prozesskettensimulation. Total Cost and Benefit of Ownership innerhalb der Produktion der Premium Aerotec GmbH. , wt Werkstattstechnik online, 100 (2010) H. 7/8, S. 638-643. | Datei |

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Lenz, A.T., Krüger, M.: (2010): Gentelligent Production - A New Era of Production Technology., CIRP ICME '10, 7th CIRP International Conference on "Intelligent Computation in Manufacturing Engineering", 23-25 June, 2010, Capri, Italy, 4 Seiten. | Datei |

Konferenz (reviewed)

Denkena, B., Köhler, J., Turger, A.: (2010): Einsatz hochharter Schneidstoffe beim Schleifen. Schleifen keramischer Werkstoffe, dihw - Diamant Hochleistungswerkzeuge, 2/2010, S. 30-36. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Dengler, B., Eikötter, M.: (2010): Systematisch entscheiden durch Gewichtung der Produktionsziele. , PRODUCTIVITY Management, 15 (2010) 2, S. 56-58. | Datei |

Zeitschriften/Aufsätze

Denkena, B., de Leon, L., Hahmann, D.: (2010): Großflächiges Schleifen von Mikrostrukturen., wt Werkstattstechnik online, 100 (2010) H. 6, S. 487-493. | Datei |

Zeitschriften/Aufsätze (reviewed)

Denkena, B., de Leon, L., Turger, A.: (2010): Roughness prediction for elastic polishing of complex ceramic workpieces., Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen), Volume 2, May 31st - June 4th 2010, Delft, Netherlands, S. 216-219. | Datei |

Konferenz (reviewed)

Denkena, B., de Leon, L., Wang, B., Krawczyk, T.: (2010): Manufacturing of Riblet-Structures by Profile Grinding with Metal Bonded Wheels., Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen), Volume 2, May 31st - June 4th 2010, Delft, Netherlands, S. 295-298. | Datei |

Konferenz (reviewed)

Denkena, B., de Leon, L., Kästner, J.: (2010): Precise Machining of Micro Dimples in Large Scale Areas., Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen), Volume 2, May 31st - June 4th 2010, Delft, Netherlands, S. 111-115. | Datei |

Konferenz (reviewed)

Denkena, B., Immel, J., Gümmer, O.: (2010): Mechatronic Chuck with 4 Degrees of Freedom Precision Positioning., Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen), Volume 2, May 31st - June 4th 2010, Delft, Netherlands, S. 225-228. | Datei |

Konferenz (reviewed)

Richter, B.I., Kellner, S., Menzel, H., Behrens, P., Denkena, B., Ostermeier, S., Hurschler, C.: (2010): Mechanical characterization of nacre as an ideal-model for innovative new endoprosthesis materials. , Archives of Orthopaedic and Trauma Surgery, online erschienen auf www. springerlink.com, 6 Seiten. | Datei | Beschreibung: <a name="ASec1"></a>Introduction   To mimic the impressive mechanical behavior of natural ceramics for technical or biomedical applications, interest has been focused on nacre, a natural composite consisting of imbricated aragonite platelets embedded in a protein matrix. Nacre is an ideal model material for implants, since it possesses favorable strength and toughness properties compared to the component materials of which it is composed. The focus of the present study was to test standardized parameters which are good indicators of the material’s suitability as an implant material. <a name="ASec2"></a>Materials and methods   A three-point bending test was performed on polished nacre samples according to international standards for Young’s modulus, bending strength and fracture toughness. A total of 60 nacre samples were tested, with 5 samples each in 4 states of hydration (dry, distilled water, 0.9% NaCl and sea water). As a basis for comparison, 10 samples of a newly developed bioceramic material were tested for fracture toughness. <a name="ASec3"></a>Results   The fracture toughness of nacre tended to be higher for specimens conditioned in 0.9% NaCl than for dry specimens (5.3 ± 0.6 vs. 4.3 ± 0.7 MPam1/2,  = 0.061). The fracture toughness of the bioceramic investigated was observed to be somewhat higher than nacre (5.8 ± 0.4 vs. 4.3 ± 0.7 MPam1/2,  ≤ 0.001). <a name="ASec4"></a>Discussion and conclusion   The increase in fracture toughness of hydrated nacre was not as large as would be expected based on the difference in stiffness of the matrix material after hydration that has been reported. Modulus and toughness were similar to published values and the fracture toughness observed was somewhat higher than reported for alumina implant ceramics, which are in use in total hip arthroplasty. In a direct comparison, we found that a newly developed alumina bioceramic material can in fact match nature in terms of fracture toughness.

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Lorenzen, L.-E., Kröning, S.: (2010): Cognitive Process Planning., 43rd CIRP International Conference on Manufacturing Systems "Sustainable Production and Logistics in Global Networks", 26-28 May 2010, Vienna, S. 683-690. | Datei |

Konferenz (reviewed)

Vortrag

… 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Anzahl der gefundenen Publikationen: 684

Henning, H.: (2007): Activities of I*PROMS on Advanced Production Machines. , IMS Workshop: Strategies for Global Manufacturing - A European View of IMS, 15 November 2007, ETH Zürich, Schweiz, 27 Seiten.

Vortrag

Denkena, B., Radons, G., Blümel, P.: (2006): From Conditiion Monitoring to Wear Prognosis and Predictive Maintenance. , XVII Workshop on Supervising and Diagnostics of Machining Systems, 13. March 2006, Karpacz, Poland, 24 Seiten.

Vortrag

Huke, P.: (2006): Einsatz von Laserstrahlung zur Verbesserung der Bauteilqualität von Karosserieblechen. Prozess: Laserstrahlumformen., World Laser Summer School 2006, 28. Juni 2006, Hannover, 13 Seiten.

Vortrag

Publikationen des Instituts für Fertigungstechnik und Werkzeugmaschinen

Vortrag